Description
VE801 nitrile gauntlets. Nitrile gloves with cotton flocklining inside. Textured exterior surface for a better grip of the handled objects. Gloves material: 100% nitrile (NBR: Nitrile Butadiene Rubber). Length: 33 cm / Thickness: 0,40 mm. Color: green. Sizes: 8 / 9 / 10
Characteristics
Type of product nitrile gauntlets
Application hands protection from mechanical risks, chemicals and micro-organisms risks, pesticides
Material nitrile
Sizes 8, 9, 10
Color green
Packaging 12 pares in a pack / 120 pares in a box
Certified
EN420:2003+A1:2009 General requirements.
EN388:2016 Protective gloves against mechanical risks.
EN ISO 374-1:2016 Protective gloves against dangerous chemicals and micro- organisms - Part 1: Terminology and performance requirements for chemical risks.
EN ISO 374-5:2016 Protective gloves against dangerous chemicals and micro-organisms - Part 5: Terminology and performance requirements against micro-organisms risks.
ISO 18889:2019 Protective gloves for pesticide operators and re-entry workers.
Producer Delta Plus
Possible application
These nitrile gauntlets will help to protect hands when contacting such chemicals as n-Heptane, caustic soda, sulfuric acid, pesticides.
Certified to standards
EN420:2003+A1:2009 General requirements
Among other requirements EN420 standard sets the sizes of the working gloves (please, go to the section Additional information for detailed information on of work gloves sizes). To quickly check your possible gloves size do as follows: measure the width of your palm approximately 1 cm under the fingers. If the width is, for example, 9 cm you should try gloves of the 9th size.
EN388:2016 Protective gloves against mechanical risks
3 resistance to abrasion (1 - 4)
1 resistance to cutting (1 - 5)
X resistance to tear (1 - 4)
1 resistance to puncture (1 - 4)
X resistance to cutting by sharp objects (TDM EN ISO 13997) (from A to F)
X defines unrealized test.
EN ISO 374-1:2016 Protective gloves against dangerous chemicals and micro- organisms - Part 1: Terminology and performance requirements for chemical risks.
Type B
J 6 > 480 min. n-Heptane (J) CAS 142-85-5
K 6 > 480 min. Caustic soda 40% CAS 1310-73-2
L 3 > 60 min. Sulfuric acid 96 % CAS 7664-93-9
EN ISO 374-5:2016 Protective gloves against dangerous chemicals and micro-organisms - Part 5: Terminology and performance requirements against micro-organisms risks.
BACTERIA + FUNGI
ISO 18889:2019 Protective gloves for pesticide operators and re-entry workers.
G2 protection for use with concentrated and diluted pesticides to the whole hand.