Description
Anti-Vibration and impact protective gloves Nysos VV904. Polyester knitted gloves reinforced by natural latex 0.8 cm thick pads on palm and fingers for vibration attenuation. Flexible thermoplastic back reinforcements for protection against impact and pinching. For an energy impact of 5 J, the maximum force transmitted to the back of the hand must be less than 4 kN. Color: black + yellow. Size: 10 / 11
Characteristics
Type of product Anti-Vibration impact resistant gloves
Application hands protection from vibration and impacts
Material polyester + natural latex + thermoplastic
Sizes 10, 11
Color black + yellow
Packaging 12 pares in a pack / 60 pares in a box
Certified
EN 420:2003+A1:2009 General requirements.
EN388:2016 Protective gloves against mechanical risks.
EN13594:2002 4.1.3/6.8.2. Impact energy attenuation.
EN ISO 10819:2013+A1:2019 Vibrations and impacts of mechanical origin.
Producer Delta Plus
Possible application
Construction and road repairs works where protection from vibration and impacts is needed.
Certified to standards
EN 420:2003+A1:2009 General requirements.
Among other requirements EN420 standard sets the sizes of the working gloves (please, go to the section Additional information for detailed information on of work gloves sizes). To quickly check your possible gloves size do as follows: measure the width of your palm approximately 1 cm under the fingers. If the width is, for example, 9 cm you should try gloves of the 9th size.
EN388:2016 Protective gloves against mechanical risks
4 resistance to abrasion (from 1 to 4)
2 resistance to cutting (from 1 to 5)
4 resistance to tear (from 1 to 4)
2 resistance to puncture (from 1 to 4)
X resistance to cutting by sharp objects (TDM EN ISO 13997) (A - F)
P protection against impact in metacarpal area (EN13594:2002 6.8.2)
X defines unrealized test.
EN ISO 10819:2013+A1:2019 Vibrations and impacts of mechanical origin
TRM 0,865 Medium frequency spectrum (25 – 200 Hz)
TRH 0,598 High frequency spectrum (200 – 1250 Hz)