A621 heat and cut resistant gloves
Description
A621 heat and cut resistant gloves. HPPE and glass fiber basis provides very high cut resistance and heat protection contact up to 100°Ñ. ¾ nitrile coating to keep the hands dry in contact with oily and greasy objects. Size: 10 / 11
Characteristics
Type of product heat and cut resistant nitrile coated work gloves
Application hands protection from mechanical risks and contact with hot objects, moisture and dirt
Material polyethylene + glass fiber + nitrile
Sizes 10, 11
Color grey + black
Packaging 12 pares in a pack / 144 pares in a box
Certified
EN420:2003+A1:2009 General requirements.
EN388:2016 Protective gloves against mechanical risks.
EN407:2004 Protective gloves against Heat & Fire risks.
Producer Portwest
Possible application
These nitrile coated work gloves will be especially useful when dealing with sharp and heated up to 100°Ñ objects.
Certified to standards
EN 420:2003+A1:2009 General requirements
Among other requirements EN420 standard sets the sizes of the working gloves (please, go to the section Additional information for detailed information on of work gloves sizes). To quickly check your possible gloves size do as follows: measure the width of your palm approximately 1 cm under the fingers. If the width is, for example, 9 cm you should try gloves of the 9th size.
EN388:2016 Protective gloves against mechanical risks
4 resistance to abrasion (from 1 to 4)
X resistance to cutting (from 1 to 5)
4 resistance to tear (from 1 to 4)
3 resistance to puncture (from 1 to 4)
D resistance to cutting by sharp objects (TDM EN ISO 13997) (A - F)
N407:2004 Protective gloves against Heat & Fire risks.
Õ resistance to flammability (1 - 4)
1 resistance to contact heat (1 - 4)
Õ resistance to convective heat (1 - 4)
Õ resistance to radiant heat (1 - 4)
Õ resistance to small projections of liquid metal (1 - 4)
Õ resistance to large projections of molten metal (1 - 4)
X defines unrealized test.
