Description
VE715GR nitrile coated gloves. Thin knitted work gloves with 3/4 nitrile coating (full coating in front and half back coating). Good dexterity level. Nitrile coating ensures good protection while working with wet, very abrasive or oily objects. VE715GR gloves are similar to popular in Ukraine VE712GR gloves (size of nitrile coverage is different). Elasticated cuffs. Size: 8 / 10
Characteristics
Type of product knitted work gloves with nitrile coating
Application hands protection from dirt and mechanical risks in high precision works.
Material polyester + palm and fingers nitrile coating
Sizes 8, 10
Color grey
Packaging 12 pares in a pack / 240 pares in a box
Certified
EN420:2003 + À1:2009 Protective gloves. General requirements.
EN388:2016 Protective gloves against mechanical risks.
Producer Delta Plus
Possible application VE712 nitrile coated work gloves have good characteristics of hands protection from abrasive influence, some moisture and oily contacts. The thin polyester basis and nitrile coating provides for good dexterity. That is why these work gloves will be very useful in high precision assembling, auto repair, construction, agricultural or other similar works.
Certified to standards
EN420:2003+A1:2009 General requirements
5 Dexterity (from 1 to 5)
Among other requirements EN420 standard sets the sizes of the working gloves (please, go to to the section Additional information for detailed information on of work gloves sizes). To quickly check your possible gloves size do as follows: measure the width of your palm approximately 1 cm under the fingers. If the width is, for example, 9 cm you should try gloves of the 9th size.
EN388:2016 Protective gloves against mechanical risks
3 resistance to abrasion (1 - 4)
1 resistance to cutting (1 - 5)
2 resistance to tear (1 - 4)
1 resistance to puncture (1 - 4)
X resistance to cutting by sharp objects (TDM EN ISO 13997) (from A to F)
X defines unrealized test.