Ultranitril 480 extra-long nitrile gauntlets
Description
Extra-long nitrile chemical protection gauntlets. Textured exterior surface, cotton flock covering the inside of the gloves. Length: 46 cm / Thickness: 0,55 mm. Color: green. Sizes: 8 / 9 / 10
Characteristics
Type of product nitrile gauntlets
Application hands protection from mechanical risks, chemicals and micro-organisms risks, viruses.
Material nitrile
Sizes 8, 9, 10
Color green
Packaging 1 pares in a pack / 12 pares in a box
Certified
EN420:2003+A1:2009 General requirements.
EN388:2016 Protective gloves against mechanical risks.
EN ISO 374-1:2016 Protective gloves against dangerous chemicals and micro- organisms - Part 1: Terminology and performance requirements for chemical risks.
EN ISO 374-5:2016 Protective gloves against dangerous chemicals and micro-organisms - Part 5: Terminology and performance requirements against micro-organisms risks.
Producer Mapa
Possible application
These nitrile gauntlets will help to protect hands when contacting such chemicals as methanol, n-Heptane, caustic soda, sulfuric, nitric or acetic acid, ammonium hydroxide, hydrogen peroxide, formaldehyde.
Certified to standards
EN420:2003+A1:2009 General requirements
Among other requirements EN420 standard sets the sizes of the working gloves (please, go to the section Additional information for detailed information on of work gloves sizes). To quickly check your possible gloves size do as follows: measure the width of your palm approximately 1 cm under the fingers. If the width is, for example, 9 cm you should try gloves of the 9th size.
EN388:2016 Protective gloves against mechanical risks
4 resistance to abrasion (0 to 4)
1 resistance to cutting (0 äî 5)
2 resistance to tear (0 äî 4)
X resistance to puncture (0 äî 4)
X resistance to cutting by sharp objects (TDM EN ISO 13997) (from A to F)
X defines unrealized test.
EN ISO 374-1:2016 Protective gloves against dangerous chemicals and micro- organisms - Part 1: Terminology and performance requirements for chemical risks.
Type A
A 3 > 60 min. Methanol (A) CAS 67-56-1
J 6 > 480 min. n-Heptane (J) CAS 142-85-5
K 6 > 480 min. Caustic soda 40% CAS 1310-73-2
O 5 > 240 min. Ammonium hydroxide 25% (O) CAS 1336-21-6
P 6 > 480 min. Hydrogen peroxide 30% (P) 7722-84-1
T 6 > 480 min. Formaldehyde 37% (T) CAS 50-00-0
EN ISO 374-5:2016 Protective gloves against dangerous chemicals and micro-organisms - Part 5: Terminology and performance requirements against micro-organisms risks.
BACTERIA + FUNGI
