VE830 nitrile gauntlets
Description
VE830 nitrile gauntlets. Thin nitrile gloves chlorinated smooth inside. Textured exterior surface for a better grip of the handled objects. No latex. Length: 33 ñì / Thickness: 0,20 mm. Color: green. Sizes: 7/8, 8/9, 9/10, 10/11
Characteristics
Type of product nitrile gauntlets
Application hands protection from mechanical risks, chemicals and micro-organisms risks, allowed to contact food products
Material nitrile
Sizes 7, 8, 9, 10
Color blue
Packaging 12 pares in a pack / 120 pares in a box
Certified
EN420:2003+A1:2009 General requirements.
EN388:2016 Protective gloves against mechanical risks.
EN ISO 374-1:2016 Protective gloves against dangerous chemicals and micro- organisms - Part 1: Terminology and performance requirements for chemical risks.
EN ISO 374-5:2016 Protective gloves against dangerous chemicals and micro-organisms - Part 5: Terminology and performance requirements against micro-organisms risks.
Producer Delta Plus
Possible application
These nitrile gauntlets will help to protect hands when contacting such chemicals as n-Heptane, caustic soda, sulfuric acid, ammonium hydroxide, hydrogen peroxide, formaldehyde.
Certified to standards
EN420:2003+A1:2009 General requirements
5 dexterity (1 to 5)
Among other requirements EN420 standard sets the sizes of the working gloves (please, go to the section Additional information for detailed information on of work gloves sizes). To quickly check your possible gloves size do as follows: measure the width of your palm approximately 1 cm under the fingers. If the width is, for example, 9 cm you should try gloves of the 9th size.
EN388:2016 Protective gloves against mechanical risks
2 resistance to abrasion (1 - 4)
X resistance to cutting (1 - 5)
X resistance to tear (1 - 4)
1 resistance to puncture (1 - 4)
X resistance to cutting by sharp objects (TDM EN ISO 13997) (from A to F)
X defines unrealized test.
EN ISO 374-1:2016 Protective gloves against dangerous chemicals and micro- organisms - Part 1: Terminology and performance requirements for chemical risks.
Type A
J 6 > 4800 min. n-Heptane (J) CAS 142-85-5
K 6 > 480 min. Caustic soda 40% CAS 1310-73-2
L 2 > 30 min. Sulfuric acid 96 % CAS 7664-93-9
O 2 > 30 min. Ammonium hydroxide 25% (O) CAS 1336-21-6
P 6 > 480 min. Hydrogen peroxide 30% (P) 7722-84-1
T 6 > 480 min. Formaldehyde 37% (T) CAS 50-00-0
EN ISO 374-5:2016 Protective gloves against dangerous chemicals and micro-organisms - Part 5: Terminology and performance requirements against micro-organisms risks.
BACTERIA + FUNGI
GLOB MIGR Food contact - Overall Migration
Contact with any type of food
