Venicut55 cut + heat resistant gloves
Description
Venicut55 cut + heat resistant gloves. HEATnocut® high performance polyethylene fibre for cut and heat (up to 100°Ñ) resistance. Could be used for handling food products. Sizes: 7 / 10
Characteristics
Type of product heat and cut resistant gloves
Application hands protection from cuts and contacts with hot objects
Material polyethylene and aramid fiber
Sizes 7, 10
Color grey
Packaging 12 pares in a pack / 120 pares in a box
Certified
EN 420:2003+A1:2009 General requirements.
EN388:2016 Protective gloves against mechanical risks.
EN407:2004 Protective gloves against Heat & Fire risks.
Producer Delta Plus
Possible application
These protective gloves will be especially useful when dealing with sharp and heated up to 100°Ñ objects
Certified to standards
EN 420:2003+A1:2009 General requirements.
5 dexterity (1 to 5)
Among other requirements EN420 standard sets the sizes of the working gloves (please, go to the section Additional information for detailed information on of work gloves sizes). To quickly check your possible gloves size do as follows: measure the width of your palm approximately 1 cm under the fingers. If the width is, for example, 9 cm you should try gloves of the 9th size.
EN388:2016 Protective gloves against mechanical risks
2 resistance to abrasion (from 1 to 4)
X resistance to cutting (from 1 to 5)
4 resistance to tear (from 1 to 4)
X resistance to puncture (from 1 to 4)
C resistance to cutting by sharp objects (TDM EN ISO 13997) (A - F)
EN407:2004 Protective gloves against Heat & Fire risks.
Õ resistance to flammability (1 - 4)
1 resistance to contact heat (1 - 4)
Õ resistance to convective heat (1 - 4)
Õ resistance to radiant heat (1 - 4)
Õ resistance to small projections of liquid metal (1 - 4)
Õ resistance to large projections of molten metal (1 - 4)
X defines unrealized test.
GLOB MIGR Food contact - Overall Migration
- Contact with wet or watery food
- Contact with fatty foods
- Contact with acidic foods
