VV910 cut & impact protection gloves
Description
EOS NOCUT VV910 cut and impact protection gloves. Cut resistant high efficiency polyethylene fiber knitted support. Double nitrile coating on palm and fingers. Flexible neoprene back reinforcements for protection against impact and pinching. Additional reinforcement between the thumb and index fingers. Kevlar® thread for a higher glove’s durability. Elasticated cuff 8 cm long. Color: grey + yellow + black. Size: 8 / 9 / 10
Characteristics
Type of product impact and cut resistant gloves
Application hands protection from cuts and impacts, partial protection from moisture and dirt
Material polyethylene fibers + thermoplastic + nitril
Sizes 8, 9, 10
Color grey + yellow + black
Packaging 12 pares in a pack / 60 pares in a box
Certified
EN 420:2003+A1:2009 General requirements.
EN388:2016 Protective gloves against mechanical risks.
EN13594:2002 4.1.3/6.8.2. Impact energy attenuation.
Producer Delta Plus
Possible application
These protective gloves will be especially useful when dealing with sharp and heated up to 250°Ñ objects. They will protect hands near open fire.
Certified to standards
EN 420:2003+A1:2009 General requirements.
Among other requirements EN420 standard sets the sizes of the working gloves (please, go to the section Additional information for detailed information on of work gloves sizes). To quickly check your possible gloves size do as follows: measure the width of your palm approximately 1 cm under the fingers. If the width is, for example, 9 cm you should try gloves of the 9th size.
EN388:2016 Protective gloves against mechanical risks
4 resistance to abrasion (from 1 to 4)
X resistance to cutting (from 1 to 5)
4 resistance to tear (from 1 to 4)
2 resistance to puncture (from 1 to 4)
D resistance to cutting by sharp objects (TDM EN ISO 13997) (A - F)
P protection against impact in metacarpal area (EN13594:2002 6.8.2)
X defines unrealized test.
EN13594:2002 4.1.3/6.8.2. Impact energy attenuation
