Description
Shield cut resistant gloves. HPPE basis provides very high level of cut resistance. Polyurethane coating on palm and fingers for a softer touch, better resistance to abrasion and additional protection from dirt. These gloves combine maximal strength in heavy working conditions with comfort and dexterity. The ideal solution for works activities with the risk of cuts. Size: 8 / 9 / 10 / 11
Characteristics
Type of product cut resistant polyurethane coated work gloves
Application hands protection from mechanical risks
Material high density polyethylene + polyurethane
Sizes 8, 9, 10, 11
Color grey
Packaging 12 pares in a pack / 120 pares in a box
Certified
EN420:2003+A1:2009 General requirements.
EN388:2016 Protective gloves against mechanical risks.
Producer Safety Jogger
Possible application
These polyurethane coated work gloves will be especially useful when dealing with sharp objects.
Certified to standards
EN 420:2003+A1:2009 General requirements
Among other requirements EN420 standard sets the sizes of the working gloves (please, go to the section Additional information for detailed information on of work gloves sizes). To quickly check your possible gloves size do as follows: measure the width of your palm approximately 1 cm under the fingers. If the width is, for example, 9 cm you should try gloves of the 9th size.
EN388:2016 Protective gloves against mechanical risks
4 resistance to abrasion (from 1 to 4)
X resistance to cutting (from 1 to 5)
4 resistance to tear (from 1 to 4)
3 resistance to puncture (from 1 to 4)
C resistance to cutting by sharp objects (TDM EN ISO 13997) (A - F)
X defines unrealized test.