Description
VENICUT59 cut resistant gloves. DELTAnocut®+ high performance fiber. Breathable polyurethane coating containing no DMF insures very good resistance to abrasion and tearing. PU coating also provides a soft touch and good sensitivity. Color: black. Sizes: 10 / 11
Characteristics
Type of product polyurethane coated cut resistant work gloves
Application hands protection from mechanical risks as well as cuts
Material DELTAnocut®+fibers + polyurethane
Sizes 10, 11
Color black
Packaging 12 pares in a pack / 60 pares in a box
Certified
EN420:2003+A1:2009 General requirements.
EN388:2016 Protective gloves against mechanical risks.
Producer Delta Plus
Possible application
These PU coated cut resistant gloves will help prevent hand cuts when working with sharp objects.
Certified to standards
EN420:2003+A1:2009 General requirements
5 dexterity (1 to 5)
Among other requirements EN420 standard sets the sizes of the working gloves (please, go to the section Additional information for detailed information on of work gloves sizes). To quickly check your possible gloves size do as follows: measure the width of your palm approximately 1 cm under the fingers. If the width is, for example, 9 cm you should try gloves of the 9th size.
EN388:2016 Protective gloves against mechanical risks
3 resistance to abrasion (from 1 to 4)
X resistance to cutting (from 1 to 5)
4 resistance to tear (from 1 to 4)
2 resistance to puncture (from 1 to 4)
D resistance to cutting by sharp objects (TDM EN ISO 13997) (A - F)
EN388:2016 Protective gloves against mechanical risks
4 resistance to abrasion (0 to 4)
Õ resistance to cutting (0 äî 5)
4 resistance to tear (0 äî 4)
2 resistance to puncture (0 äî 4)
D Resistance to cutting by sharp objects (TDM EN ISO 13997) (from A to F)
X defines unrealized test.