Description
CRYOG cryogenic gloves. Extreme low temperature protection gloves. Water-repellent cowhide full grain leather 1,1 – 1,3 ñì thick with aluminized polyester insert and synthetic lining. Cowhide split leather cuff 20 cm long with a Velcro fastening for quick donning and removal. Kevlar® thread seams. Size: 10
Characteristics
Type of product cryogenic leather gloves
Application hands protection from cold and moisture
Material cowhide full grain leather + aluminized polyester
Sizes 10
Color grey + beige
Packaging 6 pares in a pack / 36 pares in a box
Certified
EN 420:2003+A1:2009 General requirements.
EN388:2016 Protective gloves against mechanical risks.
EN511:2006 Protective gloves against cold.
Producer Delta Plus
Possible application
Hands protection from extreme cold and moisture.
Certified to standards
EN 420:2003+A1:2009 General requirements.
2 Dexterity (from 1 to 5)
4/4 >180 mn Ability of the glove to withstand the penetration of water, moisture
Among other requirements EN420 standard sets the sizes of the working gloves (please, go to the section Additional information for detailed information on of work gloves sizes). To quickly check your possible gloves size do as follows: measure the width of your palm approximately 1 cm under the fingers. If the width is, for example, 9 cm you should try gloves of the 9th size.
EN388:2016 Protective gloves against mechanical risks
2 resistance to abrasion (0 to 4)
2 resistance to cutting (0 äî 5)
2 resistance to tear (0 äî 4)
2 resistance to puncture (0 äî 4)
X resistance to cutting by sharp objects (TDM EN ISO 13997) (from A to F)
EN511:2006 Protective gloves against cold.
2 Resistance to convective cold (1 - 4)
3 Resistance to contact cold (1 - 4)
X Waterproof (0 - 1)
X defines unrealized test.