VV913 cut and impact protection gloves

Description

EOS NOCUT WINTER VV913 cut and impact protection gloves. Cut resistant high efficiency polyethylene fiber knitted support. Double nitrile coating on palm and fingers. The first coating provides the protection against dirt, moister and oils. The second coating insures a very good grip. Flexible TPR back reinforcements for protection against impact and pinching. Acryl lining for cold protection. Additional reinforcement between the thumb and index fingers. Kevlar® thread for a higher glove’s durability. Elasticated cuff 8 cm long. Color: grey + yellow + black. Size: 8 / 9 / 10

Characteristics

Type of product           lined impact and cut resistant gloves

Application       hands protection from cold, cuts and impacts, partial protection from moisture and dirt

Material            polyethylene fibers + thermoplastic + acryl + nitril

Sizes                8, 9, 10

Color                grey + yellow + black

Packaging        6 pares in a pack / 60 pares in a box

Certified

EN 420:2003+A1:2009 General requirements.

EN388:2016 Protective gloves against mechanical risks.

EN13594:2002 4.1.3/6.8.2. Impact energy attenuation.

EN511:2006 Protective gloves against cold.

Producer          Delta Plus

Possible application

These protective gloves will be especially useful when dealing with sharp and heated up to 250°С objects. They will protect hands near open fire.

Certified to standards

EN 420:2003+A1:2009 General requirements.

Among other requirements EN420 standard sets the sizes of the working gloves (please, go to the section Additional information for detailed information on of work gloves sizes). To quickly check your possible gloves size do as follows: measure the width of your palm approximately 1 cm under the fingers. If the width is, for example, 9 cm you should try gloves of the 9^th size.

EN388:2016 Protective gloves against mechanical risks

4    resistance to abrasion (from 1 to 4)

X    resistance to cutting (from 1 to 5)

4    resistance to tear (from 1 to 4)

4    resistance to puncture (from 1 to 4)

D    resistance to cutting by sharp objects (TDM EN ISO 13997) (A - F)

P    protection against impact in metacarpal area (EN13594:2002 6.8.2)

EN511:2006 Protective gloves against cold

1    Resistance to convective cold (1 - 4)

3    Resistance to contact cold (1 - 4)

X    Waterproof (0 - 1)

X defines unrealized test.